This file contains all the functions prototypes for the ADC firmware library. More...

#include "stm32f10x.h"

Data Structures
struct	ADC_InitTypeDef
	ADC Init structure definition. More...
Defines
#define	IS_ADC_ALL_PERIPH(PERIPH)
#define	IS_ADC_DMA_PERIPH(PERIPH)
#define	ADC_Mode_Independent ((uint32_t)0x00000000)
#define	ADC_Mode_RegInjecSimult ((uint32_t)0x00010000)
#define	ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000)
#define	ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000)
#define	ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000)
#define	ADC_Mode_InjecSimult ((uint32_t)0x00050000)
#define	ADC_Mode_RegSimult ((uint32_t)0x00060000)
#define	ADC_Mode_FastInterl ((uint32_t)0x00070000)
#define	ADC_Mode_SlowInterl ((uint32_t)0x00080000)
#define	ADC_Mode_AlterTrig ((uint32_t)0x00090000)
#define	IS_ADC_MODE(MODE)
#define	ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000)
#define	ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000)
#define	ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000)
#define	ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000)
#define	ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000)
#define	ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000)
#define	ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000)
#define	ADC_ExternalTrigConv_None ((uint32_t)0x000E0000)
#define	ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000)
#define	ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000)
#define	ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000)
#define	ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000)
#define	ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000)
#define	ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000)
#define	IS_ADC_EXT_TRIG(REGTRIG)
#define	ADC_DataAlign_Right ((uint32_t)0x00000000)
#define	ADC_DataAlign_Left ((uint32_t)0x00000800)
#define	IS_ADC_DATA_ALIGN(ALIGN)
#define	ADC_Channel_0 ((uint8_t)0x00)
#define	ADC_Channel_1 ((uint8_t)0x01)
#define	ADC_Channel_2 ((uint8_t)0x02)
#define	ADC_Channel_3 ((uint8_t)0x03)
#define	ADC_Channel_4 ((uint8_t)0x04)
#define	ADC_Channel_5 ((uint8_t)0x05)
#define	ADC_Channel_6 ((uint8_t)0x06)
#define	ADC_Channel_7 ((uint8_t)0x07)
#define	ADC_Channel_8 ((uint8_t)0x08)
#define	ADC_Channel_9 ((uint8_t)0x09)
#define	ADC_Channel_10 ((uint8_t)0x0A)
#define	ADC_Channel_11 ((uint8_t)0x0B)
#define	ADC_Channel_12 ((uint8_t)0x0C)
#define	ADC_Channel_13 ((uint8_t)0x0D)
#define	ADC_Channel_14 ((uint8_t)0x0E)
#define	ADC_Channel_15 ((uint8_t)0x0F)
#define	ADC_Channel_16 ((uint8_t)0x10)
#define	ADC_Channel_17 ((uint8_t)0x11)
#define	ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16)
#define	ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17)
#define	IS_ADC_CHANNEL(CHANNEL)
#define	ADC_SampleTime_1Cycles5 ((uint8_t)0x00)
#define	ADC_SampleTime_7Cycles5 ((uint8_t)0x01)
#define	ADC_SampleTime_13Cycles5 ((uint8_t)0x02)
#define	ADC_SampleTime_28Cycles5 ((uint8_t)0x03)
#define	ADC_SampleTime_41Cycles5 ((uint8_t)0x04)
#define	ADC_SampleTime_55Cycles5 ((uint8_t)0x05)
#define	ADC_SampleTime_71Cycles5 ((uint8_t)0x06)
#define	ADC_SampleTime_239Cycles5 ((uint8_t)0x07)
#define	IS_ADC_SAMPLE_TIME(TIME)
#define	ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000)
#define	ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000)
#define	ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000)
#define	ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000)
#define	ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000)
#define	ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000)
#define	ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000)
#define	ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000)
#define	ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000)
#define	ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000)
#define	ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000)
#define	ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000)
#define	ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000)
#define	IS_ADC_EXT_INJEC_TRIG(INJTRIG)
#define	ADC_InjectedChannel_1 ((uint8_t)0x14)
#define	ADC_InjectedChannel_2 ((uint8_t)0x18)
#define	ADC_InjectedChannel_3 ((uint8_t)0x1C)
#define	ADC_InjectedChannel_4 ((uint8_t)0x20)
#define	IS_ADC_INJECTED_CHANNEL(CHANNEL)
#define	ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200)
#define	ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200)
#define	ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200)
#define	ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000)
#define	ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000)
#define	ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000)
#define	ADC_AnalogWatchdog_None ((uint32_t)0x00000000)
#define	IS_ADC_ANALOG_WATCHDOG(WATCHDOG)
#define	ADC_IT_EOC ((uint16_t)0x0220)
#define	ADC_IT_AWD ((uint16_t)0x0140)
#define	ADC_IT_JEOC ((uint16_t)0x0480)
#define	IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00))
#define	IS_ADC_GET_IT(IT)
#define	ADC_FLAG_AWD ((uint8_t)0x01)
#define	ADC_FLAG_EOC ((uint8_t)0x02)
#define	ADC_FLAG_JEOC ((uint8_t)0x04)
#define	ADC_FLAG_JSTRT ((uint8_t)0x08)
#define	ADC_FLAG_STRT ((uint8_t)0x10)
#define	IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00))
#define	IS_ADC_GET_FLAG(FLAG)
#define	IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
#define	IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
#define	IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
#define	IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
#define	IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
#define	IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
#define	IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
Functions
void	ADC_DeInit (ADC_TypeDef *ADCx)
	Deinitializes the ADCx peripheral registers to their default reset values.
void	ADC_Init (ADC_TypeDef ADCx, ADC_InitTypeDef ADC_InitStruct)
	Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct.
void	ADC_StructInit (ADC_InitTypeDef *ADC_InitStruct)
	Fills each ADC_InitStruct member with its default value.
void	ADC_Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the specified ADC peripheral.
void	ADC_DMACmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the specified ADC DMA request.
void	ADC_ITConfig (ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState)
	Enables or disables the specified ADC interrupts.
void	ADC_ResetCalibration (ADC_TypeDef *ADCx)
	Resets the selected ADC calibration registers.
FlagStatus	ADC_GetResetCalibrationStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC reset calibration registers status.
void	ADC_StartCalibration (ADC_TypeDef *ADCx)
	Starts the selected ADC calibration process.
FlagStatus	ADC_GetCalibrationStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC calibration status.
void	ADC_SoftwareStartConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the selected ADC software start conversion .
FlagStatus	ADC_GetSoftwareStartConvStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC Software start conversion Status.
void	ADC_DiscModeChannelCountConfig (ADC_TypeDef *ADCx, uint8_t Number)
	Configures the discontinuous mode for the selected ADC regular group channel.
void	ADC_DiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the discontinuous mode on regular group channel for the specified ADC.
void	ADC_RegularChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
	Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
void	ADC_ExternalTrigConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the ADCx conversion through external trigger.
uint16_t	ADC_GetConversionValue (ADC_TypeDef *ADCx)
	Returns the last ADCx conversion result data for regular channel.
uint32_t	ADC_GetDualModeConversionValue (void)
	Returns the last ADC1 and ADC2 conversion result data in dual mode.
void	ADC_AutoInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the selected ADC automatic injected group conversion after regular one.
void	ADC_InjectedDiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the discontinuous mode for injected group channel for the specified ADC.
void	ADC_ExternalTrigInjectedConvConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv)
	Configures the ADCx external trigger for injected channels conversion.
void	ADC_ExternalTrigInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the ADCx injected channels conversion through external trigger.
void	ADC_SoftwareStartInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the selected ADC start of the injected channels conversion.
FlagStatus	ADC_GetSoftwareStartInjectedConvCmdStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC Software start injected conversion Status.
void	ADC_InjectedChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
	Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time.
void	ADC_InjectedSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t Length)
	Configures the sequencer length for injected channels.
void	ADC_SetInjectedOffset (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
	Set the injected channels conversion value offset.
uint16_t	ADC_GetInjectedConversionValue (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel)
	Returns the ADC injected channel conversion result.
void	ADC_AnalogWatchdogCmd (ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog)
	Enables or disables the analog watchdog on single/all regular or injected channels.
void	ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)
	Configures the high and low thresholds of the analog watchdog.
void	ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
	Configures the analog watchdog guarded single channel.
void	ADC_TempSensorVrefintCmd (FunctionalState NewState)
	Enables or disables the temperature sensor and Vrefint channel.
FlagStatus	ADC_GetFlagStatus (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
	Checks whether the specified ADC flag is set or not.
void	ADC_ClearFlag (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
	Clears the ADCx's pending flags.
ITStatus	ADC_GetITStatus (ADC_TypeDef *ADCx, uint16_t ADC_IT)
	Checks whether the specified ADC interrupt has occurred or not.
void	ADC_ClearITPendingBit (ADC_TypeDef *ADCx, uint16_t ADC_IT)
	Clears the ADCx's interrupt pending bits.

Detailed Description

This file contains all the functions prototypes for the ADC firmware library.

Author:: MCD Application Team

Version:: V3.5.0

Date:: 11-March-2011

Attention:

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

Definition in file stm32f10x_adc.h.

Data Structures

Defines

Functions

Detailed Description

© COPYRIGHT 2011 STMicroelectronics