ADC Init structure definition. More...

Detailed Description

ADC Init structure definition.

Field Documentation

Specifies whether the conversion is performed in Continuous or Single mode. This parameter can be set to ENABLE or DISABLE.

Definition at line 60 of file stm32f10x_adc.h.

Specifies whether the ADC data alignment is left or right. This parameter can be a value of ADC_data_align

Definition at line 68 of file stm32f10x_adc.h.

Defines the external trigger used to start the analog to digital conversion of regular channels. This parameter can be a value of ADC_external_trigger_sources_for_regular_channels_conversion

Definition at line 64 of file stm32f10x_adc.h.

uint32_t ADC_Mode

Configures the ADC to operate in independent or dual mode. This parameter can be a value of ADC_mode

Definition at line 52 of file stm32f10x_adc.h.

Specifies the number of ADC channels that will be converted using the sequencer for regular channel group. This parameter must range from 1 to 16.

Definition at line 71 of file stm32f10x_adc.h.

Specifies whether the conversion is performed in Scan (multichannels) or Single (one channel) mode. This parameter can be set to ENABLE or DISABLE

Definition at line 56 of file stm32f10x_adc.h.

The documentation for this struct was generated from the following file:

/opt/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h