STM32F10x Standard Peripherals Library  3.5.0
Data Fields
TIM_OCInitTypeDef Struct Reference
TIM_Exported_Types

TIM Output Compare Init structure definition. More...

#include <stm32f10x_tim.h>

Data Fields

uint16_t TIM_OCMode
uint16_t TIM_OutputState
uint16_t TIM_OutputNState
uint16_t TIM_Pulse
uint16_t TIM_OCPolarity
uint16_t TIM_OCNPolarity
uint16_t TIM_OCIdleState
uint16_t TIM_OCNIdleState

Detailed Description

TIM Output Compare Init structure definition.

Field Documentation

uint16_t TIM_OCIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM_Output_Compare_Idle_State

Note:
This parameter is valid only for TIM1 and TIM8.

Definition at line 102 of file stm32f10x_tim.h.

uint16_t TIM_OCMode

Specifies the TIM mode. This parameter can be a value of TIM_Output_Compare_and_PWM_modes

Definition at line 82 of file stm32f10x_tim.h.

uint16_t TIM_OCNIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM_Output_Compare_N_Idle_State

Note:
This parameter is valid only for TIM1 and TIM8.

Definition at line 106 of file stm32f10x_tim.h.

uint16_t TIM_OCNPolarity

Specifies the complementary output polarity. This parameter can be a value of TIM_Output_Compare_N_Polarity

Note:
This parameter is valid only for TIM1 and TIM8.

Definition at line 98 of file stm32f10x_tim.h.

uint16_t TIM_OCPolarity

Specifies the output polarity. This parameter can be a value of TIM_Output_Compare_Polarity

Definition at line 95 of file stm32f10x_tim.h.

uint16_t TIM_OutputNState

Specifies the TIM complementary Output Compare state. This parameter can be a value of TIM_Output_Compare_N_state

Note:
This parameter is valid only for TIM1 and TIM8.

Definition at line 88 of file stm32f10x_tim.h.

uint16_t TIM_OutputState

Specifies the TIM Output Compare state. This parameter can be a value of TIM_Output_Compare_state

Definition at line 85 of file stm32f10x_tim.h.

uint16_t TIM_Pulse

Specifies the pulse value to be loaded into the Capture Compare Register. This parameter can be a number between 0x0000 and 0xFFFF

Definition at line 92 of file stm32f10x_tim.h.

The documentation for this struct was generated from the following file: