STM32F10x Standard Peripherals Library  3.5.0
TIM_BDTRInitTypeDef Struct Reference

BDTR structure definition. More...

#include <stm32f10x_tim.h>

Data Fields

uint16_t TIM_OSSRState
uint16_t TIM_OSSIState
uint16_t TIM_LOCKLevel
uint16_t TIM_DeadTime
uint16_t TIM_Break
uint16_t TIM_BreakPolarity
uint16_t TIM_AutomaticOutput

Detailed Description

BDTR structure definition.

This structure is used only with TIM1 and TIM8.

Field Documentation

Specifies whether the TIM Automatic Output feature is enabled or not. This parameter can be a value of TIM_AOE_Bit_Set_Reset

Definition at line 161 of file stm32f10x_tim.h.

uint16_t TIM_Break

Specifies whether the TIM Break input is enabled or not. This parameter can be a value of Break_Input_enable_disable

Definition at line 155 of file stm32f10x_tim.h.

Specifies the TIM Break Input pin polarity. This parameter can be a value of Break_Polarity

Definition at line 158 of file stm32f10x_tim.h.

uint16_t TIM_DeadTime

Specifies the delay time between the switching-off and the switching-on of the outputs. This parameter can be a number between 0x00 and 0xFF

Definition at line 151 of file stm32f10x_tim.h.

uint16_t TIM_LOCKLevel

Specifies the LOCK level parameters. This parameter can be a value of Lock_level

Definition at line 148 of file stm32f10x_tim.h.

uint16_t TIM_OSSIState

Specifies the Off-State used in Idle state. This parameter can be a value of OSSI_Off_State_Selection_for_Idle_mode_state

Definition at line 145 of file stm32f10x_tim.h.

uint16_t TIM_OSSRState

Specifies the Off-State selection used in Run mode. This parameter can be a value of OSSR_Off_State_Selection_for_Run_mode_state

Definition at line 142 of file stm32f10x_tim.h.

The documentation for this struct was generated from the following file: