/opt/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h File Reference

This file contains all the functions prototypes for the RTC firmware library. More...

#include "stm32f10x.h"

Go to the source code of this file.

Defines
#define	RTC_IT_OW   ((uint16_t)0x0004)
#define	RTC_IT_ALR   ((uint16_t)0x0002)
#define	RTC_IT_SEC   ((uint16_t)0x0001)
#define	IS_RTC_IT(IT)   ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00))
#define	IS_RTC_GET_IT(IT)
#define	RTC_FLAG_RTOFF   ((uint16_t)0x0020)
#define	RTC_FLAG_RSF   ((uint16_t)0x0008)
#define	RTC_FLAG_OW   ((uint16_t)0x0004)
#define	RTC_FLAG_ALR   ((uint16_t)0x0002)
#define	RTC_FLAG_SEC   ((uint16_t)0x0001)
#define	IS_RTC_CLEAR_FLAG(FLAG)   ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00))
#define	IS_RTC_GET_FLAG(FLAG)
#define	IS_RTC_PRESCALER(PRESCALER)   ((PRESCALER) <= 0xFFFFF)
Functions
void	RTC_ITConfig (uint16_t RTC_IT, FunctionalState NewState)
	Enables or disables the specified RTC interrupts.
void	RTC_EnterConfigMode (void)
	Enters the RTC configuration mode.
void	RTC_ExitConfigMode (void)
	Exits from the RTC configuration mode.
uint32_t	RTC_GetCounter (void)
	Gets the RTC counter value.
void	RTC_SetCounter (uint32_t CounterValue)
	Sets the RTC counter value.
void	RTC_SetPrescaler (uint32_t PrescalerValue)
	Sets the RTC prescaler value.
void	RTC_SetAlarm (uint32_t AlarmValue)
	Sets the RTC alarm value.
uint32_t	RTC_GetDivider (void)
	Gets the RTC divider value.
void	RTC_WaitForLastTask (void)
	Waits until last write operation on RTC registers has finished.
void	RTC_WaitForSynchro (void)
	Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) are synchronized with RTC APB clock.
FlagStatus	RTC_GetFlagStatus (uint16_t RTC_FLAG)
	Checks whether the specified RTC flag is set or not.
void	RTC_ClearFlag (uint16_t RTC_FLAG)
	Clears the RTC's pending flags.
ITStatus	RTC_GetITStatus (uint16_t RTC_IT)
	Checks whether the specified RTC interrupt has occurred or not.
void	RTC_ClearITPendingBit (uint16_t RTC_IT)
	Clears the RTC's interrupt pending bits.

---

Detailed Description

This file contains all the functions prototypes for the RTC firmware library.

Author:

MCD Application Team

Version:

V3.5.0

Date:

11-March-2011

Attention:

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

© COPYRIGHT 2011 STMicroelectronics

Definition in file stm32f10x_rtc.h.