Functions
void	FLASH_SetLatency (uint32_t FLASH_Latency)
	Sets the code latency value.
void	FLASH_HalfCycleAccessCmd (uint32_t FLASH_HalfCycleAccess)
	Enables or disables the Half cycle flash access.
void	FLASH_PrefetchBufferCmd (uint32_t FLASH_PrefetchBuffer)
	Enables or disables the Prefetch Buffer.
void	FLASH_Unlock (void)
	Unlocks the FLASH Program Erase Controller.
void	FLASH_UnlockBank1 (void)
	Unlocks the FLASH Bank1 Program Erase Controller.
void	FLASH_Lock (void)
	Locks the FLASH Program Erase Controller.
void	FLASH_LockBank1 (void)
	Locks the FLASH Bank1 Program Erase Controller.
FLASH_Status	FLASH_ErasePage (uint32_t Page_Address)
	Erases a specified FLASH page.
FLASH_Status	FLASH_EraseAllPages (void)
	Erases all FLASH pages.
FLASH_Status	FLASH_EraseAllBank1Pages (void)
	Erases all Bank1 FLASH pages.
FLASH_Status	FLASH_EraseOptionBytes (void)
	Erases the FLASH option bytes.
FLASH_Status	FLASH_ProgramWord (uint32_t Address, uint32_t Data)
	Programs a word at a specified address.
FLASH_Status	FLASH_ProgramHalfWord (uint32_t Address, uint16_t Data)
	Programs a half word at a specified address.
FLASH_Status	FLASH_ProgramOptionByteData (uint32_t Address, uint8_t Data)
	Programs a half word at a specified Option Byte Data address.
FLASH_Status	FLASH_EnableWriteProtection (uint32_t FLASH_Pages)
	Write protects the desired pages.
FLASH_Status	FLASH_ReadOutProtection (FunctionalState NewState)
	Enables or disables the read out protection.
FLASH_Status	FLASH_UserOptionByteConfig (uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
	Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
uint32_t	FLASH_GetUserOptionByte (void)
	Returns the FLASH User Option Bytes values.
uint32_t	FLASH_GetWriteProtectionOptionByte (void)
	Returns the FLASH Write Protection Option Bytes Register value.
FlagStatus	FLASH_GetReadOutProtectionStatus (void)
	Checks whether the FLASH Read Out Protection Status is set or not.
FlagStatus	FLASH_GetPrefetchBufferStatus (void)
	Checks whether the FLASH Prefetch Buffer status is set or not.
void	FLASH_ITConfig (uint32_t FLASH_IT, FunctionalState NewState)
	Enables or disables the specified FLASH interrupts.
FlagStatus	FLASH_GetFlagStatus (uint32_t FLASH_FLAG)
	Checks whether the specified FLASH flag is set or not.
void	FLASH_ClearFlag (uint32_t FLASH_FLAG)
	Clears the FLASH's pending flags.
FLASH_Status	FLASH_GetStatus (void)
	Returns the FLASH Status.
FLASH_Status	FLASH_GetBank1Status (void)
	Returns the FLASH Bank1 Status.
FLASH_Status	FLASH_WaitForLastOperation (uint32_t Timeout)
	Waits for a Flash operation to complete or a TIMEOUT to occur.
FLASH_Status	FLASH_WaitForLastBank1Operation (uint32_t Timeout)
	Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.

Function Documentation

void FLASH_ClearFlag ( uint32_t FLASH_FLAG )

Clears the FLASH's pending flags.

Note:

This function can be used for all STM32F10x devices.

For STM32F10X_XL devices, this function clears Bank1 or Bank2�s pending flags
For other devices, it clears Bank1�s pending flags.

Parameters:

FLASH_FLAG,:

specifies the FLASH flags to clear. This parameter can be any combination of the following values:

FLASH_FLAG_PGERR: FLASH Program error flag
FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
FLASH_FLAG_EOP: FLASH End of Operation flag

Return values:

None

Definition at line 1443 of file stm32f10x_flash.c.

FLASH_Status FLASH_EnableWriteProtection ( uint32_t FLASH_Pages )

Write protects the desired pages.

Note:: This function can be used for all STM32F10x devices.

Parameters:

FLASH_Pages,:

specifies the address of the pages to be write protected. This parameter can be:

For STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31
For STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages124to127
For STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
For STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127
For STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
FLASH_WRProt_AllPages

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 975 of file stm32f10x_flash.c.

FLASH_Status FLASH_EraseAllBank1Pages ( void )

Erases all Bank1 FLASH pages.

Note:

This function can be used for all STM32F10x devices.

For STM32F10X_XL devices this function erases all Bank1 pages.
For all other devices it erases all Bank1 pages and it is equivalent to FLASH_EraseAllPages function.

Parameters:

None

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 555 of file stm32f10x_flash.c.

FLASH_Status FLASH_EraseAllPages ( void )

Erases all FLASH pages.

Note:: This function can be used for all STM32F10x devices.

Parameters:

None

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 492 of file stm32f10x_flash.c.

FLASH_Status FLASH_EraseOptionBytes ( void )

Erases the FLASH option bytes.

Note:: This functions erases all option bytes except the Read protection (RDP).; This function can be used for all STM32F10x devices.

Parameters:

None

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 616 of file stm32f10x_flash.c.

FLASH_Status FLASH_ErasePage ( uint32_t Page_Address )

Erases a specified FLASH page.

Note:: This function can be used for all STM32F10x devices.

Parameters:

Page_Address,: The page address to be erased.

Return values:

FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 419 of file stm32f10x_flash.c.

FLASH_Status FLASH_GetBank1Status ( void )

Returns the FLASH Bank1 Status.

Note:: This function can be used for all STM32F10x devices, it is equivalent to FLASH_GetStatus function.

Parameters:

None

Return values:

FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, FLASH_ERROR_WRP or FLASH_COMPLETE

Definition at line 1515 of file stm32f10x_flash.c.

FlagStatus FLASH_GetFlagStatus ( uint32_t FLASH_FLAG )

Checks whether the specified FLASH flag is set or not.

Note:

This function can be used for all STM32F10x devices.

For STM32F10X_XL devices, this function checks whether the specified Bank1 or Bank2 flag is set or not.
For other devices, it checks whether the specified Bank1 flag is set or not.

Parameters:

FLASH_FLAG,:

specifies the FLASH flag to check. This parameter can be one of the following values:

FLASH_FLAG_BSY: FLASH Busy flag
FLASH_FLAG_PGERR: FLASH Program error flag
FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
FLASH_FLAG_EOP: FLASH End of Operation flag
FLASH_FLAG_OPTERR: FLASH Option Byte error flag

Return values:

The	new state of FLASH_FLAG (SET or RESET).

Definition at line 1357 of file stm32f10x_flash.c.

FlagStatus FLASH_GetPrefetchBufferStatus ( void )

Checks whether the FLASH Prefetch Buffer status is set or not.

Note:: This function can be used for all STM32F10x devices.

Parameters:

None

Return values:

FLASH Prefetch Buffer Status (SET or RESET).

Definition at line 1260 of file stm32f10x_flash.c.

FlagStatus FLASH_GetReadOutProtectionStatus ( void )

Checks whether the FLASH Read Out Protection Status is set or not.

Note:: This function can be used for all STM32F10x devices.

Parameters:

None

Return values:

FLASH ReadOut Protection Status(SET or RESET)

Definition at line 1240 of file stm32f10x_flash.c.

FLASH_Status FLASH_GetStatus ( void )

Returns the FLASH Status.

Note:: This function can be used for all STM32F10x devices, it is equivalent to FLASH_GetBank1Status function.

Parameters:

None

Return values:

FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, FLASH_ERROR_WRP or FLASH_COMPLETE

Definition at line 1477 of file stm32f10x_flash.c.

uint32_t FLASH_GetUserOptionByte ( void )

Returns the FLASH User Option Bytes values.

Note:: This function can be used for all STM32F10x devices.

Parameters:

None

Return values:

The	FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) and RST_STDBY(Bit2).

Definition at line 1216 of file stm32f10x_flash.c.

uint32_t FLASH_GetWriteProtectionOptionByte ( void )

Returns the FLASH Write Protection Option Bytes Register value.

Note:: This function can be used for all STM32F10x devices.

Parameters:

None

Return values:

The	FLASH Write Protection Option Bytes Register value

Definition at line 1228 of file stm32f10x_flash.c.

void FLASH_HalfCycleAccessCmd ( uint32_t FLASH_HalfCycleAccess )

Enables or disables the Half cycle flash access.

Note:: This function can be used for all STM32F10x devices.

Parameters:

FLASH_HalfCycleAccess,:

specifies the FLASH Half cycle Access mode. This parameter can be one of the following values:

FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable

Return values:

None

Definition at line 281 of file stm32f10x_flash.c.

void FLASH_ITConfig	(	uint32_t	FLASH_IT,
		FunctionalState	NewState
	)

Enables or disables the specified FLASH interrupts.

Note:

This function can be used for all STM32F10x devices.

For STM32F10X_XL devices, enables or disables the specified FLASH interrupts for Bank1 and Bank2.
For other devices it enables or disables the specified FLASH interrupts for Bank1.

Parameters:

FLASH_IT,:	specifies the FLASH interrupt sources to be enabled or disabled. This parameter can be any combination of the following values: FLASH_IT_ERROR: FLASH Error Interrupt FLASH_IT_EOP: FLASH end of operation Interrupt
NewState,:	new state of the specified Flash interrupts. This parameter can be: ENABLE or DISABLE.

Return values:

None

Definition at line 1290 of file stm32f10x_flash.c.

void FLASH_Lock ( void )

Locks the FLASH Program Erase Controller.

Note:

This function can be used for all STM32F10x devices.

For STM32F10X_XL devices this function Locks Bank1 and Bank2.
For all other devices it Locks Bank1 and it is equivalent to FLASH_LockBank1 function.

Parameters:

None

Return values:

None

Definition at line 372 of file stm32f10x_flash.c.

void FLASH_LockBank1 ( void )

Locks the FLASH Bank1 Program Erase Controller.

Note:

this function can be used for all STM32F10x devices.

For STM32F10X_XL devices this function Locks Bank1.
For all other devices it Locks Bank1 and it is equivalent to FLASH_Lock function.

Parameters:

None

Return values:

None

Definition at line 392 of file stm32f10x_flash.c.

void FLASH_PrefetchBufferCmd ( uint32_t FLASH_PrefetchBuffer )

Enables or disables the Prefetch Buffer.

Note:: This function can be used for all STM32F10x devices.

Parameters:

FLASH_PrefetchBuffer,:

specifies the Prefetch buffer status. This parameter can be one of the following values:

FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable

Return values:

None

Definition at line 300 of file stm32f10x_flash.c.

FLASH_Status FLASH_ProgramHalfWord	(	uint32_t	Address,
		uint16_t	Data
	)

Programs a half word at a specified address.

Note:: This function can be used for all STM32F10x devices.

Parameters:

Address,:	specifies the address to be programmed.
Data,:	specifies the data to be programmed.

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 858 of file stm32f10x_flash.c.

FLASH_Status FLASH_ProgramOptionByteData	(	uint32_t	Address,
		uint8_t	Data
	)

Programs a half word at a specified Option Byte Data address.

Note:: This function can be used for all STM32F10x devices.

Parameters:

Address,:	specifies the address to be programmed. This parameter can be 0x1FFFF804 or 0x1FFFF806.
Data,:	specifies the data to be programmed.

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 929 of file stm32f10x_flash.c.

FLASH_Status FLASH_ProgramWord	(	uint32_t	Address,
		uint32_t	Data
	)

Programs a word at a specified address.

Note:: This function can be used for all STM32F10x devices.

Parameters:

Address,:	specifies the address to be programmed.
Data,:	specifies the data to be programmed.

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 681 of file stm32f10x_flash.c.

FLASH_Status FLASH_ReadOutProtection ( FunctionalState NewState )

Enables or disables the read out protection.

Note:: If the user has already programmed the other option bytes before calling this function, he must re-program them since this function erases all option bytes.; This function can be used for all STM32F10x devices.

Parameters:

Newstate,: new state of the ReadOut Protection. This parameter can be: ENABLE or DISABLE.

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 1049 of file stm32f10x_flash.c.

void FLASH_SetLatency ( uint32_t FLASH_Latency )

Sets the code latency value.

 This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
 including the latest STM32F10x_XL density devices. 

 STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
    - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
    - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
 While other STM32F10x devices features only one bank with memory up to 512 Kbytes.

 In version V3.3.0, some functions were updated and new ones were added to support
 STM32F10x_XL devices. Thus some functions manages all devices, while other are 
 dedicated for XL devices only.
 
 The table below presents the list of available functions depending on the used STM32F10x devices.  
      

 Legacy functions used for all STM32F10x devices *

   +----------------------------------------------------------------------------------------------------------------------------------+
   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
   |                                    |   devices  |  devices      |                                                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_SetLatency                    |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_HalfCycleAccessCmd            |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_PrefetchBufferCmd             |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_Unlock                        |    Yes     |      Yes      | - For STM32F10X_XL devices: unlock Bank1 and Bank2.            |
   |                                    |            |               | - For other devices: unlock Bank1 and it is equivalent         |
   |                                    |            |               |   to FLASH_UnlockBank1 function.                               |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_Lock                          |    Yes     |      Yes      | - For STM32F10X_XL devices: lock Bank1 and Bank2.              |
   |                                    |            |               | - For other devices: lock Bank1 and it is equivalent           |
   |                                    |            |               |   to FLASH_LockBank1 function.                                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ErasePage                     |    Yes     |      Yes      | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2    |
   |                                    |            |               | - For other devices: erase a page in Bank1                     |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_EraseAllPages                 |    Yes     |      Yes      | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
   |                                    |            |               | - For other devices: erase all pages in Bank1                  |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_EraseOptionBytes              |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ProgramWord                   |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ProgramHalfWord               |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ProgramOptionByteData         |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_EnableWriteProtection         |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ReadOutProtection             |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_UserOptionByteConfig          |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetUserOptionByte             |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetWriteProtectionOptionByte  |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetReadOutProtectionStatus    |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetPrefetchBufferStatus       |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ITConfig                      |    Yes     |      Yes      | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
   |                                    |            |               | - For other devices: enable Bank1's interrupts                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetFlagStatus                 |    Yes     |      Yes      | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
   |                                    |            |               | - For other devices: return Bank1's flag status                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ClearFlag                     |    Yes     |      Yes      | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag       |
   |                                    |            |               | - For other devices: clear Bank1's flag                        |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetStatus                     |    Yes     |      Yes      | - Return the status of Bank1 (for all devices)                 |
   |                                    |            |               |   equivalent to FLASH_GetBank1Status function                  |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_WaitForLastOperation          |    Yes     |      Yes      | - Wait for Bank1 last operation (for all devices)              |
   |                                    |            |               |   equivalent to: FLASH_WaitForLastBank1Operation function      |
   +----------------------------------------------------------------------------------------------------------------------------------+


 New functions used for all STM32F10x devices to manage Bank1:                                                        *
   - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
   - For other devices, these functions are optional (covered by functions listed above)                              *

   +----------------------------------------------------------------------------------------------------------------------------------+
   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
   |                                    |   devices  |  devices      |                                                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_UnlockBank1                  |    Yes     |      Yes      | - Unlock Bank1                                                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_LockBank1                     |    Yes     |      Yes      | - Lock Bank1                                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_EraseAllBank1Pages           |    Yes     |      Yes      | - Erase all pages in Bank1                                     |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_GetBank1Status               |    Yes     |      Yes      | - Return the status of Bank1                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_WaitForLastBank1Operation    |    Yes     |      Yes      | - Wait for Bank1 last operation                                |
   +----------------------------------------------------------------------------------------------------------------------------------+


 New Functions used only with STM32F10x_XL density devices to manage Bank2 *

   +----------------------------------------------------------------------------------------------------------------------------------+
   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
   |                                    |   devices  |  devices      |                                                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_UnlockBank2                  |    Yes     |      No       | - Unlock Bank2                                                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_LockBank2                     |    Yes     |      No       | - Lock Bank2                                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_EraseAllBank2Pages           |    Yes     |      No       | - Erase all pages in Bank2                                     |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_GetBank2Status               |    Yes     |      No       | - Return the status of Bank2                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_WaitForLastBank2Operation    |    Yes     |      No       | - Wait for Bank2 last operation                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_BootConfig                   |    Yes     |      No       | - Configure to boot from Bank1 or Bank2                        |
   +----------------------------------------------------------------------------------------------------------------------------------+

Note:: This function can be used for all STM32F10x devices.

Parameters:

FLASH_Latency,:

specifies the FLASH Latency value. This parameter can be one of the following values:

FLASH_Latency_0: FLASH Zero Latency cycle
FLASH_Latency_1: FLASH One Latency cycle
FLASH_Latency_2: FLASH Two Latency cycles

Return values:

None

Definition at line 254 of file stm32f10x_flash.c.

void FLASH_Unlock ( void )

Unlocks the FLASH Program Erase Controller.

Note:

This function can be used for all STM32F10x devices.

For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
For all other devices it unlocks Bank1 and it is equivalent to FLASH_UnlockBank1 function..

Parameters:

None

Return values:

None

Definition at line 319 of file stm32f10x_flash.c.

void FLASH_UnlockBank1 ( void )

Unlocks the FLASH Bank1 Program Erase Controller.

Note:

This function can be used for all STM32F10x devices.

For STM32F10X_XL devices this function unlocks Bank1.
For all other devices it unlocks Bank1 and it is equivalent to FLASH_Unlock function.

Parameters:

None

Return values:

None

Definition at line 340 of file stm32f10x_flash.c.

FLASH_Status FLASH_UserOptionByteConfig	(	uint16_t	OB_IWDG,
		uint16_t	OB_STOP,
		uint16_t	OB_STDBY
	)

Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.

Note:: This function can be used for all STM32F10x devices.

Parameters:

OB_IWDG,:	Selects the IWDG mode This parameter can be one of the following values: OB_IWDG_SW: Software IWDG selected OB_IWDG_HW: Hardware IWDG selected
OB_STOP,:	Reset event when entering STOP mode. This parameter can be one of the following values: OB_STOP_NoRST: No reset generated when entering in STOP OB_STOP_RST: Reset generated when entering in STOP
OB_STDBY,:	Reset event when entering Standby mode. This parameter can be one of the following values: OB_STDBY_NoRST: No reset generated when entering in STANDBY OB_STDBY_RST: Reset generated when entering in STANDBY

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 1118 of file stm32f10x_flash.c.

FLASH_Status FLASH_WaitForLastBank1Operation ( uint32_t Timeout )

Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.

Note:: This function can be used for all STM32F10x devices, it is equivalent to FLASH_WaitForLastOperation.

Parameters:

Timeout,: FLASH programming Timeout

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 1623 of file stm32f10x_flash.c.

FLASH_Status FLASH_WaitForLastOperation ( uint32_t Timeout )

Waits for a Flash operation to complete or a TIMEOUT to occur.

Note:

This function can be used for all STM32F10x devices, it is equivalent to FLASH_WaitForLastBank1Operation.

For STM32F10X_XL devices this function waits for a Bank1 Flash operation to complete or a TIMEOUT to occur.
For all other devices it waits for a Flash operation to complete or a TIMEOUT to occur.

Parameters:

Timeout,: FLASH programming Timeout

Return values:

FLASH Status: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 1595 of file stm32f10x_flash.c.