I2C Init structure definition. More...

Detailed Description

I2C Init structure definition.

Field Documentation

uint16_t I2C_Ack

Enables or disables the acknowledgement. This parameter can be a value of I2C_acknowledgement

Definition at line 64 of file stm32f10x_i2c.h.

Specifies if 7-bit or 10-bit address is acknowledged. This parameter can be a value of I2C_acknowledged_address

Definition at line 67 of file stm32f10x_i2c.h.

Specifies the clock frequency. This parameter must be set to a value lower than 400kHz

Definition at line 52 of file stm32f10x_i2c.h.

Specifies the I2C fast mode duty cycle. This parameter can be a value of I2C_duty_cycle_in_fast_mode

Definition at line 58 of file stm32f10x_i2c.h.

uint16_t I2C_Mode

Specifies the I2C mode. This parameter can be a value of I2C_mode

Definition at line 55 of file stm32f10x_i2c.h.

Specifies the first device own address. This parameter can be a 7-bit or 10-bit address.

Definition at line 61 of file stm32f10x_i2c.h.

The documentation for this struct was generated from the following file:

/opt/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h