STM32F10x Standard Peripherals Library  3.5.0
Functions
MISC_Private_Functions
MISC

Functions

void NVIC_PriorityGroupConfig (uint32_t NVIC_PriorityGroup)
 Configures the priority grouping: pre-emption priority and subpriority.
void NVIC_Init (NVIC_InitTypeDef *NVIC_InitStruct)
 Initializes the NVIC peripheral according to the specified parameters in the NVIC_InitStruct.
void NVIC_SetVectorTable (uint32_t NVIC_VectTab, uint32_t Offset)
 Sets the vector table location and Offset.
void NVIC_SystemLPConfig (uint8_t LowPowerMode, FunctionalState NewState)
 Selects the condition for the system to enter low power mode.
void SysTick_CLKSourceConfig (uint32_t SysTick_CLKSource)
 Configures the SysTick clock source.

Function Documentation

void NVIC_Init ( NVIC_InitTypeDef *  NVIC_InitStruct)

Initializes the NVIC peripheral according to the specified parameters in the NVIC_InitStruct.

Parameters:
NVIC_InitStruct,:pointer to a NVIC_InitTypeDef structure that contains the configuration information for the specified NVIC peripheral.
Return values:
None

Definition at line 112 of file misc.c.

void NVIC_PriorityGroupConfig ( uint32_t  NVIC_PriorityGroup)

Configures the priority grouping: pre-emption priority and subpriority.

Parameters:
NVIC_PriorityGroup,:specifies the priority grouping bits length. This parameter can be one of the following values:
  • NVIC_PriorityGroup_0: 0 bits for pre-emption priority 4 bits for subpriority
  • NVIC_PriorityGroup_1: 1 bits for pre-emption priority 3 bits for subpriority
  • NVIC_PriorityGroup_2: 2 bits for pre-emption priority 2 bits for subpriority
  • NVIC_PriorityGroup_3: 3 bits for pre-emption priority 1 bits for subpriority
  • NVIC_PriorityGroup_4: 4 bits for pre-emption priority 0 bits for subpriority
Return values:
None

Definition at line 96 of file misc.c.

void NVIC_SetVectorTable ( uint32_t  NVIC_VectTab,
uint32_t  Offset 
)

Sets the vector table location and Offset.

Parameters:
NVIC_VectTab,:specifies if the vector table is in RAM or FLASH memory. This parameter can be one of the following values:
  • NVIC_VectTab_RAM
  • NVIC_VectTab_FLASH
Offset,:Vector Table base offset field. This value must be a multiple of 0x200.
Return values:
None

Definition at line 156 of file misc.c.

void NVIC_SystemLPConfig ( uint8_t  LowPowerMode,
FunctionalState  NewState 
)

Selects the condition for the system to enter low power mode.

Parameters:
LowPowerMode,:Specifies the new mode for the system to enter low power mode. This parameter can be one of the following values:
  • NVIC_LP_SEVONPEND
  • NVIC_LP_SLEEPDEEP
  • NVIC_LP_SLEEPONEXIT
NewState,:new state of LP condition. This parameter can be: ENABLE or DISABLE.
Return values:
None

Definition at line 175 of file misc.c.

void SysTick_CLKSourceConfig ( uint32_t  SysTick_CLKSource)

Configures the SysTick clock source.

Parameters:
SysTick_CLKSource,:specifies the SysTick clock source. This parameter can be one of the following values:
  • SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
  • SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
Return values:
None

Definition at line 199 of file misc.c.