Functions
void	FSMC_NORSRAMDeInit (uint32_t FSMC_Bank)
	Deinitializes the FSMC NOR/SRAM Banks registers to their default reset values.
void	FSMC_NANDDeInit (uint32_t FSMC_Bank)
	Deinitializes the FSMC NAND Banks registers to their default reset values.
void	FSMC_PCCARDDeInit (void)
	Deinitializes the FSMC PCCARD Bank registers to their default reset values.
void	FSMC_NORSRAMInit (FSMC_NORSRAMInitTypeDef *FSMC_NORSRAMInitStruct)
	Initializes the FSMC NOR/SRAM Banks according to the specified parameters in the FSMC_NORSRAMInitStruct.
void	FSMC_NANDInit (FSMC_NANDInitTypeDef *FSMC_NANDInitStruct)
	Initializes the FSMC NAND Banks according to the specified parameters in the FSMC_NANDInitStruct.
void	FSMC_PCCARDInit (FSMC_PCCARDInitTypeDef *FSMC_PCCARDInitStruct)
	Initializes the FSMC PCCARD Bank according to the specified parameters in the FSMC_PCCARDInitStruct.
void	FSMC_NORSRAMStructInit (FSMC_NORSRAMInitTypeDef *FSMC_NORSRAMInitStruct)
	Fills each FSMC_NORSRAMInitStruct member with its default value.
void	FSMC_NANDStructInit (FSMC_NANDInitTypeDef *FSMC_NANDInitStruct)
	Fills each FSMC_NANDInitStruct member with its default value.
void	FSMC_PCCARDStructInit (FSMC_PCCARDInitTypeDef *FSMC_PCCARDInitStruct)
	Fills each FSMC_PCCARDInitStruct member with its default value.
void	FSMC_NORSRAMCmd (uint32_t FSMC_Bank, FunctionalState NewState)
	Enables or disables the specified NOR/SRAM Memory Bank.
void	FSMC_NANDCmd (uint32_t FSMC_Bank, FunctionalState NewState)
	Enables or disables the specified NAND Memory Bank.
void	FSMC_PCCARDCmd (FunctionalState NewState)
	Enables or disables the PCCARD Memory Bank.
void	FSMC_NANDECCCmd (uint32_t FSMC_Bank, FunctionalState NewState)
	Enables or disables the FSMC NAND ECC feature.
uint32_t	FSMC_GetECC (uint32_t FSMC_Bank)
	Returns the error correction code register value.
void	FSMC_ITConfig (uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState)
	Enables or disables the specified FSMC interrupts.
FlagStatus	FSMC_GetFlagStatus (uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
	Checks whether the specified FSMC flag is set or not.
void	FSMC_ClearFlag (uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
	Clears the FSMC's pending flags.
ITStatus	FSMC_GetITStatus (uint32_t FSMC_Bank, uint32_t FSMC_IT)
	Checks whether the specified FSMC interrupt has occurred or not.
void	FSMC_ClearITPendingBit (uint32_t FSMC_Bank, uint32_t FSMC_IT)
	Clears the FSMC's interrupt pending bits.

Function Documentation

void FSMC_ClearFlag	(	uint32_t	FSMC_Bank,
		uint32_t	FSMC_FLAG
	)

Clears the FSMC's pending flags.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
FSMC_FLAG,:	specifies the flag to clear. This parameter can be any combination of the following values: FSMC_FLAG_RisingEdge: Rising egde detection Flag. FSMC_FLAG_Level: Level detection Flag. FSMC_FLAG_FallingEdge: Falling egde detection Flag.

Return values:

None

Definition at line 747 of file stm32f10x_fsmc.c.

void FSMC_ClearITPendingBit	(	uint32_t	FSMC_Bank,
		uint32_t	FSMC_IT
	)

Clears the FSMC's interrupt pending bits.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
FSMC_IT,:	specifies the interrupt pending bit to clear. This parameter can be any combination of the following values: FSMC_IT_RisingEdge: Rising edge detection interrupt. FSMC_IT_Level: Level edge detection interrupt. FSMC_IT_FallingEdge: Falling edge detection interrupt.

Return values:

None

Definition at line 833 of file stm32f10x_fsmc.c.

uint32_t FSMC_GetECC ( uint32_t FSMC_Bank )

Returns the error correction code register value.

Parameters:

FSMC_Bank,:

specifies the FSMC Bank to be used This parameter can be one of the following values:

FSMC_Bank2_NAND: FSMC Bank2 NAND
FSMC_Bank3_NAND: FSMC Bank3 NAND

Return values:

The	Error Correction Code (ECC) value.

Definition at line 603 of file stm32f10x_fsmc.c.

FlagStatus FSMC_GetFlagStatus	(	uint32_t	FSMC_Bank,
		uint32_t	FSMC_FLAG
	)

Checks whether the specified FSMC flag is set or not.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
FSMC_FLAG,:	specifies the flag to check. This parameter can be one of the following values: FSMC_FLAG_RisingEdge: Rising egde detection Flag. FSMC_FLAG_Level: Level detection Flag. FSMC_FLAG_FallingEdge: Falling egde detection Flag. FSMC_FLAG_FEMPT: Fifo empty Flag.

Return values:

The	new state of FSMC_FLAG (SET or RESET).

Definition at line 697 of file stm32f10x_fsmc.c.

ITStatus FSMC_GetITStatus	(	uint32_t	FSMC_Bank,
		uint32_t	FSMC_IT
	)

Checks whether the specified FSMC interrupt has occurred or not.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
FSMC_IT,:	specifies the FSMC interrupt source to check. This parameter can be one of the following values: FSMC_IT_RisingEdge: Rising edge detection interrupt. FSMC_IT_Level: Level edge detection interrupt. FSMC_IT_FallingEdge: Falling edge detection interrupt.

Return values:

The	new state of FSMC_IT (SET or RESET).

Definition at line 782 of file stm32f10x_fsmc.c.

void FSMC_ITConfig	(	uint32_t	FSMC_Bank,
		uint32_t	FSMC_IT,
		FunctionalState	NewState
	)

Enables or disables the specified FSMC interrupts.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
FSMC_IT,:	specifies the FSMC interrupt sources to be enabled or disabled. This parameter can be any combination of the following values: FSMC_IT_RisingEdge: Rising edge detection interrupt. FSMC_IT_Level: Level edge detection interrupt. FSMC_IT_FallingEdge: Falling edge detection interrupt.
NewState,:	new state of the specified FSMC interrupts. This parameter can be: ENABLE or DISABLE.

Return values:

None

Definition at line 637 of file stm32f10x_fsmc.c.

void FSMC_NANDCmd	(	uint32_t	FSMC_Bank,
		FunctionalState	NewState
	)

Enables or disables the specified NAND Memory Bank.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND
NewState,:	new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.

Return values:

None

Definition at line 501 of file stm32f10x_fsmc.c.

void FSMC_NANDDeInit ( uint32_t FSMC_Bank )

Deinitializes the FSMC NAND Banks registers to their default reset values.

Parameters:

FSMC_Bank,:

specifies the FSMC Bank to be used This parameter can be one of the following values:

FSMC_Bank2_NAND: FSMC Bank2 NAND
FSMC_Bank3_NAND: FSMC Bank3 NAND

Return values:

None

Definition at line 129 of file stm32f10x_fsmc.c.

void FSMC_NANDECCCmd	(	uint32_t	FSMC_Bank,
		FunctionalState	NewState
	)

Enables or disables the FSMC NAND ECC feature.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank2_NAND: FSMC Bank2 NAND FSMC_Bank3_NAND: FSMC Bank3 NAND
NewState,:	new state of the FSMC NAND ECC feature. This parameter can be: ENABLE or DISABLE.

Return values:

None

Definition at line 564 of file stm32f10x_fsmc.c.

void FSMC_NANDInit ( FSMC_NANDInitTypeDef * FSMC_NANDInitStruct )

Initializes the FSMC NAND Banks according to the specified parameters in the FSMC_NANDInitStruct.

Parameters:

FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef structure that contains the configuration information for the FSMC NAND specified Banks.

Return values:

None

Definition at line 262 of file stm32f10x_fsmc.c.

void FSMC_NANDStructInit ( FSMC_NANDInitTypeDef * FSMC_NANDInitStruct )

Fills each FSMC_NANDInitStruct member with its default value.

Parameters:

FSMC_NANDInitStruct,: pointer to a FSMC_NANDInitTypeDef structure which will be initialized.

Return values:

None

Definition at line 418 of file stm32f10x_fsmc.c.

void FSMC_NORSRAMCmd	(	uint32_t	FSMC_Bank,
		FunctionalState	NewState
	)

Enables or disables the specified NOR/SRAM Memory Bank.

Parameters:

FSMC_Bank,:	specifies the FSMC Bank to be used This parameter can be one of the following values: FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
NewState,:	new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.

Return values:

None

Definition at line 475 of file stm32f10x_fsmc.c.

void FSMC_NORSRAMDeInit ( uint32_t FSMC_Bank )

Deinitializes the FSMC NOR/SRAM Banks registers to their default reset values.

Parameters:

FSMC_Bank,:

specifies the FSMC Bank to be used This parameter can be one of the following values:

FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4

Return values:

None

Definition at line 102 of file stm32f10x_fsmc.c.

void FSMC_NORSRAMInit ( FSMC_NORSRAMInitTypeDef * FSMC_NORSRAMInitStruct )

Initializes the FSMC NOR/SRAM Banks according to the specified parameters in the FSMC_NORSRAMInitStruct.

Parameters:

FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef structure that contains the configuration information for the FSMC NOR/SRAM specified Banks.

Return values:

None

Definition at line 176 of file stm32f10x_fsmc.c.

void FSMC_NORSRAMStructInit ( FSMC_NORSRAMInitTypeDef * FSMC_NORSRAMInitStruct )

Fills each FSMC_NORSRAMInitStruct member with its default value.

Parameters:

FSMC_NORSRAMInitStruct,: pointer to a FSMC_NORSRAMInitTypeDef structure which will be initialized.

Return values:

None

Definition at line 380 of file stm32f10x_fsmc.c.

void FSMC_PCCARDCmd ( FunctionalState NewState )

Enables or disables the PCCARD Memory Bank.

Parameters:

NewState,: new state of the PCCARD Memory Bank. This parameter can be: ENABLE or DISABLE.

Return values:

None

Definition at line 538 of file stm32f10x_fsmc.c.

void FSMC_PCCARDDeInit ( void )

Deinitializes the FSMC PCCARD Bank registers to their default reset values.

Parameters:

None

Return values:

None

Definition at line 158 of file stm32f10x_fsmc.c.

void FSMC_PCCARDInit ( FSMC_PCCARDInitTypeDef * FSMC_PCCARDInitStruct )

Initializes the FSMC PCCARD Bank according to the specified parameters in the FSMC_PCCARDInitStruct.

Parameters:

FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef structure that contains the configuration information for the FSMC PCCARD Bank.

Return values:

None

Definition at line 328 of file stm32f10x_fsmc.c.

void FSMC_PCCARDStructInit ( FSMC_PCCARDInitTypeDef * FSMC_PCCARDInitStruct )

Fills each FSMC_PCCARDInitStruct member with its default value.

Parameters:

FSMC_PCCARDInitStruct,: pointer to a FSMC_PCCARDInitTypeDef structure which will be initialized.

Return values:

None

Definition at line 444 of file stm32f10x_fsmc.c.

Functions

Function Documentation